10
How It Works
When the tire pressure drops significantly below recommended levels:
Tire Pressure Monitoring System (TPMS)
Monitors the vehicle’s tire pressures.
What to Do
1. Visually inspect the tires for damage.
2. Inflate the tire(s) to the
recommended pressures listed on
the label on the driver’s doorjamb.
Programming the DPMS
1. Turn on the vehicle. Make sure
the shift lever is in Park (P).
3. Press SET. You will hear a beep.
2. Adjust your preferred seat,
outside mirror, and steering
wheel settings.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
Notes:
• Stored positions can also be recalled by pressing one of the memory
buttons (1 or 2) on the door.
• Lumbar position cannot be stored.
Driving Position Memory System (DPMS)
Store driver’s seat, outside mirror, and steering wheel positions into memory for each
corresponding keyless remote (1 or 2), which are recalled when you unlock the
driver’s door with the remote and enter the vehicle.
11
The low tire pressure
indicator comes on.
A message appears in
the MID.
Roll the selector wheel to
the tire pressure monitor to
see which tires have low
pressure.
15 RLX_KA_English_ATG_BQS51272_ATG_NEW STYLE 5/13/2014 12:44 PM Page 7
