How It Works
1514
HOMELINK
®
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YESNO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YESNO
YESNO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold the desired HomeLink
button and the button on the remote
transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds, press and hold
the programmed HomeLink button
for 2 seconds.
a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Program your vehicle to operate up to three remote-controlled devices around your
home, such as garage doors, lighting, or home security systems.
If you have any problems programming HomeLink, see the owner’s manual
included with the device you are trying to program, call HomeLink at
(800) 355-3515, or visit www.homelink.com.
REVERSE TILT DOOR MIRRORS
When you shift into Reverse (R), you can tilt either outside door mirror down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
Training a Button
How It Works
• To tilt the driver’s door
mirr
or, move the mirror
selector switch to the left
(L) position.
• To tilt the passenger’s side
door mirror, move the
mirror selector switch to
the right (R) position.
• To turn the feature off,
move the switch to the
middle position.
SECONDROW SEATS WITH ONETOUCH ACCESS
Move the second-row seats forward easily using one button to access the third-row
seats when the vehicle is stopped.
Press the button to move the
seat forward.
Push the seat back until it
locks into place to return it to
its original position.
From the back of the second-row seats
From the side of the second-row seats
14 MDX ATG_ATG Facing 3/29/2013 12:36 PM Page 14
