Cruza Brand's Products

Doc. No.

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

Cisco Systems, Inc.

Corporate Headquarters

Cisco 2600 Series Power Supply

Conﬁguration Note

Cisco Product Numbers:

PWR-2600-AC=, PWR-2600-DC=

This document describes how to replace the AC or DC power supply in a Cisco 2600 series router.

This document is intended for the power supply installer, who should be familiar with electronic

circuitry and wiring practices and have experience as an electronic or electromechanical technician.

Use this document in conjunction with the Cisco 2600 Series Hardware Installation Guide and the

Regulatory Compliance and Safety Information document for your router.

If you have questions or need help, refer to the section “Obtaining Service and Support” later in this

document.

This document contains the following sections:

• Safety Recommendations on page 2

• Overview of Cisco 2600 Series Power Supplies on page 4

• Tools and Equipment Required on page 6

• Removing the Cover on page 6

• Removing the Power Supply on page 8

• Installing the Power Supply on page 9

• Replacing the Cover on page 9

• Replacing Connections to the Router on page 10

• Troubleshooting on page 11

• Obtaining Service and Support on page 11

• Cisco Connection Online on page 12

• Ordering Documentation on page 12

78-5171-01