Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2001. Cisco Systems, Inc. All rights reserved.
OL-4853-08
ReleaseNotesforCiscoConfigMakerVersion2.6
Application
These Release Notes provide information about using the Cisco ConfigMaker V2.6 application and
contain the following sections:
• Introduction
• Key Features
• What's New in Version 2.6
• System Requirements
• Supported Cisco IOS Software Releases
• Supported Devices and Modules
• Current Documentation
• Caveats / Troubleshooting
• Obtaining Cisco Documentation
• Obtaining Technical Assistance
To download the application or obtain more information about Cisco ConfigMaker, see the Cisco
ConfigMaker Home Page on the Internet at the following URL: http://www.cisco.com/go/configmaker.
Introduction
Cisco ConfigMaker is an easy-to-use Microsoft Windows 98, Windows Me, Windows 2000, Windows XP,
and Windows NT 4.0-based application that configures Cisco routers, switches, hubs, and other devices.
Using a graphical user interface (GUI), you draw your network and then Cisco ConfigMaker creates the
Cisco IOS configuration files for the devices on your network without requiring knowledge of the Cisco
IOS command-line interface (CLI). In addition, you can use Cisco ConfigMaker as an off-line tool. You
can draw and configure your entire network without having the devices on-hand until you are ready to
deliver the configuration files to them.
Cisco ConfigMaker does not configure every IOS parameter or support every IOS feature. Rather, it
helps you get your device up and running by supporting the most common features.
