assembly instructions
Family: Thistledown Item No. 4174 VZ
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Please refer to the hanging instruction sheet (I.S. 19-75) provided to continue
installation of this fixture. Then refer back to this sheet to install glass.
1. To install glass, remove socket ring (1) from socket (A).
2. Slip glass (2) over socket (A).
3. Thread socket ring (1) onto socket (A) and tighten until snug.
Note: Over tightening ring with a tool may cause damage to the glass.
4. Repeat steps 1-3 for remaining glass.
5. Fixture can now be lamped accordingly.
*** The construction of this fixture will be accomplished by first making all
necessary electrical connections, hanging the fixture from the ceiling, and
then installing the glass.
start here
4174
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Drawing 1 - Glass Installation
1
2
A
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
