assembly instructions
Item No. 2090 / 2094 / 2095
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first mounting the
mounting strap to the junction box, making all necessary electrical connections,
mounting the fixture to the wall and then installing the glass.
start here
2094
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Glass installation Instructions - see Drawing 2.
1. First take glass (2) and slip small hole in top, over the socket (1), and hold glass in
position.
2. Slip socket spacer (3), lip side up, into glass and over socket (1), followed by socket
cover (4), threaded side up, and thread cover on to socket and tighten to secure glass.
3. Slip yoke assembly (5) over glass (2) making sure bottom lip of glass fits into ring (R).
4. Align yoke coupler (6) with threaded arm (7) and thread coupler onto arm and
tighten to secure yoke assembly (5).
Drawing 1 - Fixture Mounting
Drawing 2 - Glass Installation
06.01.13
2090
A
J
B C D
E
F
1. Prepare mounting strap (A) by threading the two long mounting screws (B)
into the back of the mounting strap (A) - see Drawing 1.
• Be sure the holes into which the screws are threaded match the spacing of holes (D)
in the backplate (E).
2. Attach mounting strap (A) to junction box (J) using two screws (C).
3.
(B) through the two mounting holes (D)
in the
backplate (E) - see Drawing 1
.
4. (F) on to the end of the mounting
screws (B), and tighten.
3
4
7
5
2
1
6
R
HINKLEY L IGH TIN G 33000 Pin O ak Parkway, Avon La ke, OH 44012 800.446 .55 39 / 440.653. 5500 hin kleylighting.com
2095
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.
