Demo-model with water circulation
- Install the dishwasher with the help of a air level.
- Before start-up close the drain hose with the delivered plug!
- To start-up fill into the container distilled water (Quantity approx.
3 liters).
- No using of detergent or rinse-aid!
- To activate the dishwasher switch on the main-button. Then push
the ECO 50 program button and finally the start key. For operating
only closing the door.
- After the program - end the dishwasher can be activated by
opening the door and activating the start key again.
- Water change after 10 days approximately.
- For the water change or water removal
Remove the plug from the drain hose. Put the drain hose into a
sufficiently large container. By pressing the start key (RESET)
3 seconds the water is pumped into the container. At the display
0:01 is indicated. The cancelling procedure is started by closing the
door.
- Before start-up close the drain hose with the delivered plug!
- Electrical connection 230 V alternating current (AC)
- Continuous working maximum 8 hours.
In the case of breakdown:
Tel. 0049-9071-52-
1451 (Herr Singer/Herr Demharter)
9000 677 693 (9105) 440
