1. Levelling spacers
2. Upper basket stop
3. Lower spray arm
4. Detergent dispenser
5. Control panel
6. Rating plate
7. Rinse aid dispenser
8. Large filter
9. Central filter
10. Upper spray arm
11. Upper basket
In this fully integrated appliance the controls are
located on the top of the door. When selecting a
programme, the door needs to be open.
1. On/Off push button
2. Mains on indicator light
3. Programme selector buttons
4. End of cycle indicator light
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short signal "instruction accepted"
When any of the push buttons are pressed (except
the On/Off push button), a short audible signal
informs you that the machine has accepted the
instruction given.
Long signal "programme starting"
A continuous audible signal, heard only when you
close the dishwasher door, informs you that the
washing programme is starting.
Intermittent signal "end of programme"
An intermittent audible signal, lasting for
approximately five seconds, informs you that the
wash programme has ended.
If you wish to deactivate these audible signals,
press both "NORMAL 65°" and "BIO 50°"
programme buttons for about 3 seconds, until the
intermittent audible signal can no longer be heard.
To reactivate the audible signals, press buttons
together again for about 3, until an intermittent
audible signal is heard.
The setting will remain memorised after
switching off the dishwasher.
